Talaria MX3 and MX4 Warp 9 gearcase vent installation instructions.
Locate the gearcase vent routed from gearcase up along frame. MX4 models you will need to remove the pinch clamp if it’s still installed. To do this remove line from...
How to install the Warp 9 Gearcase Vent System on a Talaria MX3 and MX4
Locate the gearcase vent routed from the gearcase up along the frame. For MX4 models you will need to remove the pinch clamp if it’s still installed. To do that,...
Surron Chain Drive Instructions
Disconnect battery. Remove the plastic belt cover located on the left side of the motor. Loosen motor shaft belt pulley nut this is best to do if you have an...
Warp 9 Wheel Break In Procedure For FULL SIZE BIKES
Warp 9 Wheel Break In Procedure For FULL SIZE BIKES Bedding brakes is a MUST!!! We like to build up speed, drag the brake for 5-6 seconds to build heat and then increase lever...
