Will this fit your bike?
Pick your make and model before you order.
Gearing guide
What this sprocket size does to your bike, gas or electric. Smaller rear sprocket = more top speed, less pull. Bigger rear sprocket = more pull, less top speed. Enter what is on your bike and compare.
Changing the rear wheel or tire too? optional · a different rear diameter changes gearing as well
Estimates, not a promise. These percentages are gear-ratio math and hold for any bike, gas or electric; horsepower does not change them, it only sets the scale of the comparison. Only the rear tire's overall diameter affects gearing; the front wheel does not. Diameter is worked out from the size printed on the tire (rim plus two sidewalls) and real tires vary by brand by a few percent. How much you feel depends on power, weight, tire size, terrain and, on electrics, controller settings. The top-speed figure assumes the engine or motor reaches the same RPM at full speed; a bike that runs out of power before it runs out of revs will see less change there, and will instead cruise at higher or lower RPM by the same percentage. Bigger rear sprockets need a longer chain and may need a chain guide or swingarm clearance check. Count your own teeth before ordering.
Product Description
Replace your worn stock sprocket or change your gearing with Warp 9’s Talaria Komodo Countershaft Sprockets. Precision-cut splines provide a tight fit on the output shaft, while high-carbon steel construction delivers strength and durability. Drilled relief holes reduce weight, and a black ED coating provides corrosion resistance.
Available in 14- and 15-tooth sizes, so you can retain the stock tooth count or adjust your gearing to suit your riding.
- Precision-cut splines for a tight output shaft fit
- Machined from high-carbon steel for strength and durability
- Drilled to reduce weight
- Black ED coating for corrosion resistance
- 14-tooth: Stock Komodo size
- 15-tooth: Alternative gearing option
Installation note: The motor must be lowered to replace the countershaft sprocket. It’s a straightforward job with the proper tools.
Goes with this
Chain and sprocket bolts to go with it
