Product Description
- V2 now includes several updates over original version
- 2" longer wire for those running high bar mounts with taller bars.
- Mounts to the backside of the OEM Brakes, Hope V4 & E4 Brakes and Hayes Dominion A4 with 2 bolt clamps.
- includes back half clamp to be used with non OEM brakes such as TRP, Hope Tech 4 V4 & Shimano Saints etc.
- includes burnt titanium screws to work with OEM brakes or the included back half clamp
- Plugs into factory wiring harness, No cutting or splicing
- Works with OEM headlight or any headlight that plugs into the OEM surron harness
- Easily switch between off/on with your headlight
Keep the plugs dry: pack the connector with Permatex Dielectric Tune-Up Grease when you plug it in to keep out water and corrosion.
Watch the install
Straight from the Warp 9 shop floor.
Goes with this
Mount them right: clamps, risers and bar ends for these bars
Matched to the bikes this part fits
Rider photos
Real bikes running this part
Enduro3Runs this part
2024 Surron Light Bee
Matte Black rims · Matte Black hubs19 × 1.60 front · 16 × 1.85 rear15 Warp 9 partsby Lithuania
Trials5✓ Same bike as yours
2022 Surron Light Bee
Red rims · Black hubs19 × 1.40 front · 19 × 1.40 rear6 Warp 9 partsby Sheldon T.
Adventure2✓ Same bike as yours
2026 79Bike Falcon PRO16 × 1.85 rear2 Warp 9 partsby Timothy J.
2✓ Same bike as yours
Surron Light Bee
Magnesium rims · Black hubsE-Moto wheelsby Gus B.
Trail✓ Same bike as yours
Surron Light Bee
Purple rims · Black hubs1 Warp 9 partby Benjamin A.
Trail2✓ Same bike as yours
Surron Light Bee
Black rims · Red hubs3 Warp 9 partsby Kasper M.
$24.00